基于虚拟现实技术的中药生产实训仿真实现

基于虚拟现实技术的中药生产实训仿真实现

摘要：虚拟现实在生产实训上的开发常会走向两个极端，或者缺乏沉浸感，不贴近生产实际，或者工程宏大，造价昂贵。针对这些问题，在生产类仿真系统架构设计基础上，提出仿真精细程度要结合生产实际和局部细节全面考虑，尽可能从轻巧实用上选取实现方法，探讨了基于此思路的中药制药实训仿真系统开发实现关键技术。整个系统实用轻巧。#br# 关键词：虚拟现实；生产仿真；方法选取；Quest 3D

出版日期:2014-02-28 发布日期:2015-03-26

The Production Simulation Development of Chinese Traditional Medicine Based on Virtual Reality

Abstract: The production simulation development based on virtual reality technology often goes two extremes: either being far away from actual production process while lacking immersion effect or being too expensive as a huge project. To solve those problems, a new method has been established based on the architecture of production simulation system which was discussed in the author’s other papers. The actual production and the precise details should be considered before the fine granularity of the simulation is determined. The selected development tools and methods should be as lightweight and practical as possible. Based on those ideas, a Chinese traditional medicine simulation system has been developed. It is characterized by practicality.#br# Key words: virtual reality; production simulation; methods selection; Quest 3D

Online:2014-02-28 Published:2015-03-26

摘要/Abstract

摘要： 虚拟现实在生产实训上的开发常会走向两个极端，或者缺乏沉浸感，不贴近生产实际，或者工程宏大，造价昂贵。针对这些问题，在生产类仿真系统架构设计基础上，提出仿真精细程度要结合生产实际和局部细节全面考虑，尽可能从轻巧实用上选取实现方法，探讨了基于此思路的中药制药实训仿真系统开发实现关键技术。整个系统实用轻巧。

关键词: 虚拟现实, 生产仿真, 方法选取, Quest 3D

Abstract: The production simulation development based on virtual reality technology often goes two extremes: either being far away from actual production process while lacking immersion effect or being too expensive as a huge project. To solve those problems, a new method has been established based on the architecture of production simulation system which was discussed in the author’s other papers. The actual production and the precise details should be considered before the fine granularity of the simulation is determined. The selected development tools and methods should be as lightweight and practical as possible. Based on those ideas, a Chinese traditional medicine simulation system has been developed. It is characterized by practicality.

Key words: virtual reality, production simulation, methods selection, Quest 3D

项朝阳，唐润华，汪小根，庄义修. 基于虚拟现实技术的中药生产实训仿真实现[J]. 图学学报.

Xiang Chaoyang, Tang Runhua, Wang Xiaogen, Zhuang Yixiu. The Production Simulation Development of Chinese Traditional Medicine Based on Virtual Reality[J]. Journal of Graphics.

[1]	朱永宁 , 葛婷 , 杜盛瑀 , 楼泽如 , 王建民 . 虚拟现实全景流体绘画系统的可用性研究[J]. 图学学报, 2021, 42(5): 833-840.
[2]	赵建军, 黄竣鹏, 陈俊良. 基于 Leap Motion 的电影前期预演人机交互方法[J]. 图学学报, 2021, 42(1): 71-78.
[3]	郑明钰, 李家和, 张晗, 骆岩林, 申佳丽, 朱小明. 支持力反馈的沉浸式物理学习环境的构建 [J]. 图学学报, 2021, 42(1): 79-86.
[4]	滕健，黄佳慧，宫凯 . 基于 BCI 的虚拟现实模拟驾驶教学系统设计[J]. 图学学报, 2020, 41(2): 217-223.
[5]	邱远航 1，孙贤波 1，刘勇弟 1，蔡正清 1，徐宏勇 2 . 污水处理厂虚拟现实教学软件开发及应用[J]. 图学学报, 2020, 41(2): 233-236.
[6]	林莹莹，蔡睿凡，朱雨真，唐祥峻，金小刚. 基于Leap Motion 的虚拟现实陶艺体验系统[J]. 图学学报, 2020, 41(1): 57-65.
[7]	李祥 1,2，王学文 1,2，谢嘉成 1,2，乔春光 1,2，杨兆建 1,2 . 复杂工况下采运装备虚拟运行关键技术研究[J]. 图学学报, 2019, 40(2): 403-409.
[8]	姜立军1,2，李建余1，李哲林1,2，吴章鸿1，张瑜1. 虚拟骑行中的三种导航界面的体验度量[J]. 图学学报, 2018, 39(3): 515-521.
[9]	冯桂珍1，池建斌1，邢海军1，张增强1，贾双2. 基于Unity3D 的减速器虚拟拆装实验[J]. 图学学报, 2018, 39(2): 304-308.
[10]	孙辉，吕健，寸文哲. VR 系统信息可视化模型[J]. 图学学报, 2018, 39(2): 317-326.
[11]	朱晓强1,2，周浩1,2，宋磊1,2. 基于α-shape 的树冠LOD 建模[J]. 图学学报, 2017, 38(3): 303-313.
[12]	刘伟，杜强，张顺心，张建军. 基于VR 技术的工程图学移动学习系统[J]. 图学学报, 2016, 37(6): 857-.
[13]	王新翔，赵罡，肖文磊. 虚拟飞行场景中事故特效的实时仿真[J]. 图学学报, 2016, 37(2): 243-248.
[14]	王学文，秦毅，杨昕宇，庞新宇，杨兆建. 采煤机虚拟现实装配仿真系统研究[J]. 图学学报, 2015, 36(2): 268-273.
[15]	李嘉，侯文，夏文文，杨艳芳，陈定方. 基于力反馈的虚拟拆卸系统关键技术研究[J]. 图学学报, 2014, 35(3): 450-454.