欢迎访问《图学学报》 分享到:

图学学报

• 几何设计与计算 • 上一篇    下一篇

基于点到曲面投影的飞机蒙皮波纹度计算方法

  

  • 出版日期:2016-10-31 发布日期:2016-10-20
  • 基金资助:
    基于工艺驱动的全机全三维综合测量系统开发与集成技术项目(2013E11222);飞机后段自动精准对合技术与成套设备项目(2014ZX04001-081-07)

A Calculation Method of Aircraft Surface Waviness Based on the Method of Point Projection on Curved Surface

  • Online:2016-10-31 Published:2016-10-20

摘要: 为了精确检测飞机蒙皮表面的波纹度,提高检测效率,研究了一种改进的点到参
数曲面投影算法,即使用椭圆环面片逼近蒙皮设计曲面的方法求解点到曲面的投影,采用该方
法从曲面的测量点云中提取待测波纹度位置的测量点,并计算测量点与理论位置的偏差值。根
据偏差值的大小变化趋势提取局部极值即波峰波谷值,并计算相应的波长,结合波纹度的定义
完成波纹度计算。实验结果表明,该方法分析结果准确、效率高。

关键词: 波纹度, 点到曲面投影, 局部极值, 飞机蒙皮

Abstract: To measure the waviness of aircraft surface accurately and efficiently, an improved algorithm
for the projection of points on parameter-curved surface is proposed. The point projection on curved
surfaces is calculated by adopting the approach of elliptical torus patch approximation. Firstly, by using
this algorithm, points are extracted from the surface’s massive measuring points and the offset value
between measuring points and their projection on the theoretical positions is calculated. Secondly, the
local extremum is extracted at the peak and valley of waviness according to the variation trend of the
offset value. Then its corresponding wavelength is calculated. Finally, the waviness is calculated based
on its definition. Experiments show that this method is highly efficient, and generates accurate results.

Key words: waviness, point projection on surfaces, local extremum, aircraft surface