欢迎访问《图学学报》 分享到：
图学学报

图学学报

• 智能设计与数字化设计 • 上一篇    下一篇

基于SolidWorks 的可视化定制研究

  

  1. 1. 华南理工大学聚合物新型成型装备国家工程研究中心，广东 广州 510640；
    2. 华南理工大学聚合物成型加工工程教育部重点实验室，广东 广州 510640
  • 出版日期:2018-06-30 发布日期:2018-07-10
  • 基金资助:
    国家自然科学基金项目(51435005)；佛山市科技创新项目(2016AG100262)

Research on Visual Customization Based on SolidWorks

  1. 1. The National Engineering Research Center of Novel Equipment for Polymer Processing, South China University of Technology, Guangzhou Guangdong 510640, China;
    2. The Key Laboratory of Polymer Processing Engineering of Ministry of Education, South China University of Technology, Guangzhou Guangdong 510640, China
  • Online:2018-06-30 Published:2018-07-10

PDF (PC)

120

摘要： 针对可视化定制系统中如何实时自动装配和交互浏览的问题，提出一种基于
SolidWorks 二次开发自动装配的方法。用户在网页上确定定制方案后，服务器端和与服务器有
固定联系的一台主机远程通讯，对SolidWorks 二次开发后的自动装配程序安装在此主机上，服
务器端远程启动主机上的自动装配程序，并接收装配完整的eDrawings 文件，将三维模型反馈
到网页上显示，用户可以在网页上实现虚拟交互浏览。该方法可以实现三维模型在多选择方案
下的实时自动组装和网页上的虚拟交互。

关键词: SolidWorks 二次开发, 自动装配, 虚拟交互, 可视化定制

Abstract: In order to solve the problem of real-time automatic assembly and interactive browsing in
visual customization system, an automatic assembly method based on secondary development of
SolidWorks in network environment is proposed. User defined customized solutions on the web page
and a remote communication between a server and a server that has a fixed connection. The automatic
assembly program secondary development of SolidWorks installed on the host. The server automatic
assembly program remote boot on the host and receive the complete assembly of eDrawings files. The
3D model is fed back to the web page. The user can browse the web page in the realization of virtual
interaction. This method can realize the real time automatic assembly and virtual interaction of the 3D
model under the multi choice scheme.

Key words: secondary development of SolidWorks, automatic assembly, virtual interaction, visual
customization