计算时代工程图学之定位与建设思考

doi:10.11996/JG.j.2095-302X.2023010194

图学学报 ›› 2023, Vol. 44 ›› Issue (1): 194-198.DOI: 10.11996/JG.j.2095-302X.2023010194

计算时代工程图学之定位与建设思考

于海燕¹(), 刘衍聪², 何援军³

1.东华大学机械工程学院，上海 201620
2.中国石油大学(华东)，山东青岛 266580
3.上海交通大学计算机系，上海 200240

收稿日期:2021-10-27 修回日期:2022-04-10 出版日期:2023-10-31 发布日期:2023-02-16
作者简介:于海燕(1974-)，女，副教授，博士。主要研究方向为图学、CAD、机械设计等。E-mail：yuhy@dhu.edu.cn

Reflections on the orientation and development of engineering graphics in the era of computing

YU Hai-yan¹(), LIU Yan-cong², HE Yuan-jun³

1. College of Mechanical Engineering, Donghua University, Shanghai 201620, China
2. China University of Petroleum (Qingdao), Qingdao Shandong 266580, China
3. Department of Computer Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

Received:2021-10-27 Revised:2022-04-10 Online:2023-10-31 Published:2023-02-16
About author:YU Hai-yan (1974-), associate professor, Ph.D. Her main research interests include graphics, CAD, mechanical design, etc. E-mail：yuhy@dhu.edu.cn

摘要/Abstract

摘要：

在2次《图学学科发展报告》基础上，专门讨论工程图学科学与学科的继承问题，探讨其在计算时代的定位与发展。梳理工程图学及画法几何的理论、方法和技术，揭示工程图学无歧义表达、完成工程计算中所隐含的严密理论及科学价值。剖析在计算时代工程图学呈现和渗透到计算机图形学的某些新形态。分析这2大图学分支的共性，特别是两者在图形思维和计算思维上对CAD的支撑作用。以此共性基础为核心，以工程应用为导向，以科学研究与人才培养为目标，探索建立多元思维融合的工程图学学科建设框架。

关键词: 图学, 工程图学, 画法几何, 图形计算思维

Abstract:

On the basis of the two development reports on graphics, the inheritance of the science and discipline of engineering graphics was particularly discussed, and its orientation and development in the computing era were also explored. The theories, methods, and technologies of engineering graphics, as well as descriptive geometry, were reviewed, revealing the rigorous theories and scientific values implied in its unambiguous expression and engineering computing. In the computing era, discussions were conducted on some new forms that have found their way from engineering graphics to computer graphics. The commonalities of these two major branches of graphics were analyzed, especially their supporting role for CAD regarding graphic thinking and computational thinking. With these common foundations as the core, the engineering application as the guide, and scientific research and talent training as the goal, explorations were pursued on the establishment of a disciplinary development framework for engineering graphics integrating with multiple thinking modes.

Key words: graphics, engineering graphics, descriptive geometry, graphics computing thinking

中图分类号:

TH126

于海燕, 刘衍聪, 何援军. 计算时代工程图学之定位与建设思考[J]. 图学学报, 2023, 44(1): 194-198.

YU Hai-yan, LIU Yan-cong, HE Yuan-jun. Reflections on the orientation and development of engineering graphics in the era of computing[J]. Journal of Graphics, 2023, 44(1): 194-198.

图/表 1

参考文献 20

[1]	李培根. 工程教育需要大工程观[J]. 高等工程教育研究, 2011(3): 1-3, 59.
	LI P G. Engineering education needs the view of engineering with A big E[J]. Research in Higher Education of Engineering, 2011(3): 1-3, 59 (in Chinese).
[2]	李伯聪. 工程思维的性质和认识史及其对工程教育改革的启示: 工程教育哲学笔记之三[J]. 高等工程教育研究, 2018(4): 45-54.
	LI B C. Nature and cognition history of engineering thinking and its enlightenment to engineering education reform—notes on emerging engineering education(Ⅲ)[J]. Research in Higher Education of Engineering, 2018(4): 45-54 (in Chinese).
[3]	于海燕, 彭正洪, 何援军, 等. 工程图学内涵的变化与发展[J]. 图学学报, 2018, 39(5): 990-995.
	YU H Y, PENG Z H, HE Y J, et al. Changing and developing of connotation on engineering graphics[J]. Journal of Graphics, 2018, 39(5): 990-995 (in Chinese).
[4]	童秉枢, 田凌, 冯涓. 10年来我国工程图学教学改革中的问题、认识与成果[J]. 工程图学学报, 2008, 29(4): 1-5.
	TONG B S, TIAN L, FENG J. Problems and achievements of engineering graphics teaching reform in recent 10 years[J]. Journal of Engineering Graphics, 2008, 29(4): 1-5 (in Chinese).
[5]	童秉枢. 图学思维的研究与训练[J]. 工程图学学报, 2010, 31(1): 1-5.
	TONG B S. Research and training on graphics thinking[J]. Journal of Engineering Graphics, 2010, 31(1): 1-5 (in Chinese).
[6]	陆国栋, 孙毅, 费少梅, 等. 面向思维力、表达力、工程力培养的图学教学改革[J]. 高等工程教育研究, 2015(5): 1-7, 58.
	LU G D, SUN Y, FEI S M, et al. Graph-teaching reform on the cultivation of thinking ability, expressiveness and engineering competency[J]. Research in Higher Education of Engineering, 2015(5): 1-7, 58 (in Chinese).
[7]	张宗波, 王珉, 吴宝贵, 等. “线上+线下融合式”工程图学课程建设与教学实践[J]. 图学学报, 2016, 37(5): 718-725.
	ZHANG Z B, WANG M, WU B G, et al. Engineering graphics course construction and teaching practice based on "online and offline hybridized education mode"[J]. Journal of Graphics, 2016, 37(5): 718-725 (in Chinese).
[8]	刘衍聪, 马晓丽, 伊鹏. 现代图学教学中的图感因素探析[J]. 图学学报, 2013, 34(6): 110-113.
	LIU Y C, MA X L, YI P. Analysis of sense of drawing factors in modern graphics teaching[J]. Journal of Graphics, 2013, 34(6): 110-113 (in Chinese).
[9]	中国图学学会. 2018-2019图学学科发展报告[M]. 北京: 中国科学技术出版社, 2020: 3-38.
	China Graphics Society. 2018-2019 Report on advances in graphics[M]. Beijing: Science and Technology of China Press, 2020: 3-38 (in Chinese).
[10]	中国图学学会. 2012-2013图学学科发展报告[M]. 北京: 中国科学技术出版社, 2014: 3-40.
	China Graphics Society. 2012-2013 Report on advances in graphics[M]. Beijing: Science and Technology of China Press, 2014: 3-40 (in Chinese).
[11]	杜善义. 工程科学与科技强国[J]. 科技导报, 2020, 38(10): 41-43.
	DU S Y. Engineering Science and powerful country of science and technology[J]. Science & Technology Review, 2020, 38(10): 41-43 (in Chinese).
[12]	GARDNER H. Multiple intelligence: new horizons[M]. New York: Basic Books, 2006: 3-20.
[13]	WING J M. Computational thinking[J]. Communications of the ACM, 2006, 49(3): 33-35.
[14]	WING J M. Computational thinking: what and why? [EB/OL]. (2010-09-17) [2021-06-01]. http://www.exploringcs.Org//wpcontent/uploads/2010/09/Wing-CT-Article.pdf.
[15]	MIGLIARI R. Descriptive geometry: from its past to its future[J]. Nexus Network Journal, 2012, 14(3): 555-571. DOI URL
[16]	PRADO-VELASCO M, MARÍN R O, GARCÍA L, et al. Graphical modelling with computer extended descriptive geometry (CeDG): description and comparison with CAD[EB/OL]. [2021-06-12]. http://cad-journal.net/files/vol_18/CAD_18(2)_2021_272-284.pdf.
[17]	于海燕, 蔡鸿明, 何援军. 图学计算基础[J]. 图学学报, 2013, 34(6): 1-5.
	YU H Y, CAI H M, HE Y J. The computational basis of graphics[J]. Journal of Graphics, 2013, 34(6): 1-5 (in Chinese).
[18]	何援军. 几何计算[M]. 北京: 高等教育出版社, 2013: 21-163.
	HE Y J. Geometric Computing[M]. Beijing: Higher Education Press, 2013: 121-163 (in Chinese).
[19]	何援军. 图学计算基础[M]. 北京: 机械工业出版社, 2018: 110-133.
	HE Y J. Fundamentals of Graphics Computing[M]. Beijing: China Machine Press, 2018: 110-133 (in Chinese).
[20]	YU H Y, HE Y J, ZHANG W J. A new approach to analyzing interactions of two objects in space based on a specially-tailored local coordinate system[EB/OL]. [2021-06-12]. https://ieeexplore.ieee.org/document/9409150.

计算时代工程图学之定位与建设思考

Reflections on the orientation and development of engineering graphics in the era of computing

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

图/表 1

参考文献 20

相关文章 15

编辑推荐

Metrics

本文评价

[1]	王妍, 杜秀华, 杨蕊, 祝娟, 曹喜承. 基于 OBE 的工程图学混合式教学新体系[J]. 图学学报, 2021, 42(4): 696-702.
[2]	田劼 1,王红尧 1,WU Xin-li2,BUSKIRK Gracevan2. 宾州州立大学工程图学课程教学方法启发 [J]. 图学学报, 2020, 41(5): 847-853.
[3]	何援军. 轴测投影的若干问题[J]. 图学学报, 2020, 41(4): 667-676.
[4]	栾英艳，王迎，何蕊. 新工科背景下工程图学课程改革研究[J]. 图学学报, 2020, 41(1): 164-168.
[5]	于勇 1，刘静华 1，赵罡 1,2 . 与基于模型定义技术相融合的工程图学课程教学探讨[J]. 图学学报, 2019, 40(4): 816-821.
[6]	张京英，杨薇，佟献英，张辉，张彤 . 构建基于 OBE 的立体化制图教学新体系[J]. 图学学报, 2019, 40(1): 201-206.
[7]	史彩娟，段昌钰，谷志斌 . 基于结构化多视图稀疏限定的监督特征选择算法研究[J]. 图学学报, 2018, 39(6): 1036-1041.
[8]	潘恒，何进荣，凌宇，任思霖. 基于多视图边界判别投影的高光谱图像分类[J]. 图学学报, 2018, 39(6): 1062-1068.
[9]	伊鹏，刘衍聪，石永军，秦臻，张宗波 . 基于增强现实技术的工程图学移动端教学系统设计与开发[J]. 图学学报, 2018, 39(6): 1207-1213.
[10]	何援军 1，于海燕 2，柳伟 1，彭正洪 3，蔡鸿明 1，密新武 3，王子茹 4 . 图学学科蓝图构想[J]. 图学学报, 2018, 39(5): 976-983.
[11]	彭正洪 1，于海燕 2，焦洪赞 1，蔡鸿明 3，何援军 3 . 图形演化下的图学学科[J]. 图学学报, 2018, 39(5): 984-989.
[12]	于海燕 1，彭正洪 2，何援军 3，王生泽 1 . 工程图学内涵的变化与发展[J]. 图学学报, 2018, 39(5): 990-995.
[13]	李瑞森1，张树有1，伊国栋1，薛立华2，谭建荣1. 多属性多关联的工程图学试题库与多路径智能组卷系统研究[J]. 图学学报, 2018, 39(2): 373-380.
[14]	张海森1，杨光辉2，刘超见1，王继隆1，李继璇1，郎宸1. 基于AR 技术的跨平台移动终端的辅助学习系统[J]. 图学学报, 2018, 39(1): 85-90.
[15]	何援军. 画法几何新解[J]. 图学学报, 2018, 39(1): 136-147.