Welcome to Journal of Graphics

Journal of Graphics ›› 2026, Vol. 47 ›› Issue (4): 683-694.DOI: 10.11996/JG.j.2095-302X.2026040683

• Image Processing and Computer Vision • Previous Articles     Next Articles

Unsupervised image stitching method guided by flow field confidence and anisotropic constraints

TIAN Shuo1, HUANG Yan1, QI Jiawang1, SHI Chaojun1,2,3, QI Yincheng1,2,3()   

  1. 1 Department of Electronic and Communication Engineering, North China Electric Power University, Baoding Hebei 071003, China
    2 Hebei Key Laboratory of Power Internet of Things Technology, North China Electric Power University, Baoding Hebei 071003, China
    3 Hebei Engineering Research Center of Intelligent Technology for Power Internet of Things, North China Electric Power University, Baoding Hebei 071003, China
  • Received:2026-03-25 Accepted:2026-06-10 Online:2026-08-31 Published:2026-08-31
  • Contact: QI Yincheng
  • Supported by:
    National Natural Science Foundation of China(62206095)

Abstract:

To address the non-rigid deformation challenges faced by existing unsupervised deep image stitching methods in large-parallax scenes, an unsupervised image stitching approach guided by flow-field confidence and constrained by anisotropic geometric structure was proposed. The goal was to mitigate the conflict between alignment accuracy and structural integrity in deep image stitching and to enable image stitching in large-parallax scenes. First, a Flow Confidence Estimation Module (FCEM) was designed to assign confidence weights to the dense correspondence flow field generated by the context-aware layer. This module guided the network to prioritize reliable displacement signals in texture-rich regions while actively suppressing mismatches in low-confidence areas, thereby enhancing the reliability of mesh deformation. Second, an Anisotropic Geometric Structure Constraint (AGSC) was proposed, which constructed adaptive weights using Sobel edge responses and decoupled the traditional isotropic smoothness constraint into a mesh-smoothing term and a vertical-curvature term. By applying curvature penalties in the vertical direction to preserve straight-line structures while allowing horizontal deformation flexibility, the method achieves a balance between alignment accuracy and structural constraints. Experimental results on the UDIS-D dataset demonstrated that, while maintaining alignment performance comparable to that of mainstream deep stitching methods, the proposed method reduced the Line-fitting Root Mean Square Error (LRMSE) by 28.1% and the collinearity error (Eerr) by 33.4% across the full test set, effectively alleviating vertical structural bending in stitched images. Additional experiments on a 147-pair multi-scene image stitching dataset showed reductions in LRMSE and Eerr of 5.8% and 27.0%, respectively, compared to the baseline model. Both objective metrics and visual stitching results confirm the superiority of the proposed method in preserving vertical structures, verifying its geometric structure-preserving capability and cross-scene generalization performance.

Key words: image stitching, mesh deformation, flow confidence estimation, anisotropic geometric structure constraint, geometric structure preservation

CLC Number: