欢迎访问《图学学报》 分享到:

图学学报

• 智能设计与数字化设计 • 上一篇    下一篇

感性工学中的参数化设计方法关键技术研究 现状与展望

  

  1. (1. 贵州大学现代制造技术教育部重点实验室,贵州 贵阳 550025; 2. 贵州大学机械工程学院,贵州 贵阳 550025)
  • 出版日期:2019-10-31 发布日期:2019-11-06
  • 基金资助:
    国家自然科学基金项目(51865003,51465007);贵州省科技计划项目(黔科合平台人才[2018]5781)

Key Technologies in Parametric Design Methods in Kansei Engineering:  State of art and progress

  1. (1. Key Laboratory of Advanced Manufacturing Technology of the Ministry of Education, Guizhou University, Guiyang Guizhou 550025, China;  2. School of Mechanical Engineering, Guizhou University, Guiyang Guizhou 550025, China)
  • Online:2019-10-31 Published:2019-11-06

摘要:  感性工学(KE)是将消费者感性体验融入设计中的常用方法。过去十余年间,国内 外学者对 KE 展开了研究并取得了一定成果。通过对国内外 KE 中的参数化设计方法关键技术 研究成果进行梳理,首先总结了 KE 中常用的感性意象与产品特征参数化方法;随后重点介绍 了 3 种 KE 模型构建问题上的常用方法及其特点,并将现有研究进行了对比;最后讨论了 KE 现存问题并对未来可能的研究趋势进行了展望。

关键词: 产品设计, KE, 参数化设计, KE 模型, 关键技术, 综述

Abstract: Kansei engineering is a common method to integrate the perceptual experience of consumers into design. Over the past ten years, scholars at home and abroad have carried out many researches on kansei engineering and made some achievements. Based on a review of the achievements made in the key technologies in parametric design methods in kansei engineering, firstly, this paper summarized the common kansei image in kansei engineering and product feature parameterization method; secondly, we highlighted the common methods and characteristics of three kinds of KE model construction and made a comparison among the existing studies; finally, the existing problems with kansei engineering were discussed and the possible future research trendswere sketched out.

Key words:  product design, KE, parametric design, KE model, key technology, review